[ Comments
|| Disclaimer ][ Previous Page || Table of Contents || BCBC Home Page || Next Page ]
0.6.1 BCBC has three methods of procurement for CCS. This
section of the Manual deals with determining which method
and associated specification
documents should be used. Detailed instructions for each document type will be found in
sections 1.1,
2.1, 3.1 or 4.1.
The following guidelines are to be applied in determining which specifications to use. However, other criteria may bias the absolute numbers noted below, therefore, specific direction as to the type of specification to use should be obtained from the project manager before proceeding:
0.6.1.1 Lease Projects
Instructions to Designers
Section 1.1
(Left Blank for numbering consistency) Section
1.2
Document - Performance
Specification Section 1.3
0.6.1.2 Direct Bid
Criteria -New Construction less than 3,000mē.
Instructions to Designers
Section 2.1
(Left Blank for numbering consistency) Section
2.2
Document - Performance
Specification Section 2.3
0.6.1.3 New Construction RFP
Criteria - New Construction over 3,000 mē.
Instructions to Designers
Section 3.1
Document - Instruction to Proponents
Section 3.2
Document - Performance
Specification Section 3.3
0.6.1.4 Retrofit RFP
Criteria - Existing Buildings of all sizes.
Instructions to Designers
Section 4.1
Document - Instruction to Proponents
Section 4.2
Document - Performance
Specification Section 4.3
[ Previous Page || Table of Contents || BCBC Home Page || Next Page ]
[ Comments
|| Disclaimer ]