[ Table of Contents || Overview || Next Section ]

The information displayed here is available as a Microsoft Word.doc file. Please click on this link to download this file.

CCS: New Construction - Request for Proposals

3.1           Instructions to Designers

      This section is intended to give designers specific instructions as to how to structure the construction
      documents using the British Columbia Buildings Corporation standardized documents found in Section 3.0.

3.1.1        Instructions to Proponents - Section 3.2

      Fill in the information on the cover sheet of the Instructions to Proponents and the Invitation for Proposal. The
      remainder of the document is to be issued unaltered.

3.1.2        Technical Requirements

3.1.2.1     Table of Contents

      Prepare a Table of Contents following the headings below.

3.1.2.2     15910 Scope

      Prepare an overview and explanation of the CCS objectives as they relate to this project. Note any particular
      features or issues which may assist the controls contractor to understand the project better.

3.1.2.3    15920 Project Specific Alterations to BCBC - CCS Performance Specification

     This is where any deviations to the BCBC standard CCS Performance Specification can be made, if
     necessary. This approach is used to assist the controls contractors in focusing on issues which may affect
     pricing of the project.

3.1.2.4    15925 Sequence of Operation (if required)

     This section is to be used if there are any strategies to be programmed by the contractor which do not have
     standardized System Points Lists, Graphics & Start up Logic prepared.

3.1.2.5    15930 Systems (Points Lists, Graphics & Start up Logic)
               Summary Page - Prepare a summary page of the points and graphics following the format in the example in
               Section 10 (form 10_E5).
               DDC Points - Choose the BCBC standardized System Points Lists, Graphic & Start up Logic sheets from
               Section 5 for each mechanical or electrical system. For more in-depth instruction see Section 5.1.
               Misc. Points - Add these points on form 5_O2 found in Section 5.O.
               Non DDC Points - Add these points on form 5_O3 found in Section 5.O.
               Emergency/Safety Points - Add these points on form 5_O4 found in Section 5.O.
               Other Graphics - Add any other graphics required. Where standardized graphics are not in manual, BCBC
               will prepare same for the project in conjunction with the designer.

3.1.2.6    15940 BCBC - CCS Performance Specification - Section 3.3

    Attach this document unaltered.

---

[ Table of Contents || Overview || Next Section ]

[ Comments || Disclaimer ]